Fabry-Pérot Lasers: 1700 nm - 2400 nm
nanoplus offers FP laser diodes at any wavelength between 1700 nm and 2400 nm.
Key features of nanoplus Fabry-Pérot laser diodes
- spectral multimode
- lateral single mode
- continuous wave
- room temperature
- custom wavelengths
Why choose nanoplus Fabry-Pérot laser diodes
- precise selection of target wavelength
- typically > 5 mW output power
- small size
- easy usability
- high efficiency
- long-term stability
For more than 20 years nanoplus has been the technology leader for lasers in gas sensing. We produce lasers at large scale at our own fabrication sites in Gerbrunn and Meiningen. nanoplus cooperates with the leading system integrators in the TDLAS based analyzer industry. More than 30,000 installations worldwide prove the reliability of nanoplus lasers.
Quick description of nanoplus Fabry-Pérot laser technology
nanoplus uses a unique and patented technology for Fabry-Pérot laser manufacturing. We follow a ridge waveguide approach, which is independent of the material system.
Related Information for nanoplus FP laser diodes between 1700 nm and 2400 nm
Mountings & Accessories
The following table summarizes the typical FP laser specifications in the 1700 nm to 2400 nm range:
|parameters (T = 25 °C)||symbol||unit||minimum||typical||maximum|
|operating wavelength (at Top, Iop)||λop||nm||-20||specify||+20|
|optical output power (at λop)||Pop||mW||10|
|operating chip temperature||Top||°C||+20||+25||+50|
|operating case temperature*||TC||°C||-20||+25||+50|
nanoplus Fabry-Pérot lasers show outstanding spectral and electrical properties. They are demonstrated in figures 1 and 2. Click on the graphics to enlarge.
nanoplus offers a variety of free space and fiber coupled mountings. Configure your laser according to your needs.
Free space mountings
Select a TO header with or without TEC. The TO headers are hermetically sealed with cap and window. Ask for customization without cap or without window. c-mount is available upon request. Please click on the mounting for detailed specifications and dimensions.
Fiber coupled mounting
The nanoplus TO5 heatsink facilitates your laser set up by:
- improved heat distribution
- connectors for laser diode driver
- connectors for temperature controller
- M6 thread for optical posts
- easy use with standard cage systems